Mobile Air Carts and Trailers

This rugged system has a standard two worker Breather Box mounted onto a pre-filter cart. Breathing air may be fed to the cart system from plant or mobile air compressors & prefiltered through the high capacity oil, water & particulate separators which located at the cart's rear. These pre-filters will automatically drain oil & water discharged from the compressor before entering the Breather Box. This process will extend Breather Box filter life & reduce the cost of maintenance downtime. Features 30 cfm Breather BoxTM installed on the Blast-Air TM Cart (48 cfm flow capacity) - 2 couplings 2 - 300 cfm pre filters w/ automatic drains are cart mounted 1st stage filter with change indicator removes bulk water & particulate - 5.0 micron 2nd stage filter with change indicator - coalescing oil & ultrafine filtration for particulates - .01 micron 3rd stage filter with change indicator has charcoal to remove organic vapors & objectionable odors - .03 micron Automatic drains for 1st & 2nd stage filters 2 yr warranty for CO sensor & monitor Inline CO (carbon monoxide) monitor with (optional) co / o2 monitor (Intrinsically safe CSA compliant units available) Electro chemical sensor provides gas detection & rapid calibration in under 2 min. 2 - 9V battery, 8 to 16 VDC and / or 115 VAC operation 125 PSI safety relief valve setting Aluminum block solid manifold w/ manual drain 0 - 160 psi Pressure Gauge Visual Flowmeter to Verify Air Flow to Monitor External Case Mounted CO Warning Lights and Audible Alarm Remote DC Alarm Jack with Cover Cap, standard Maximum Inlet Pressure - 150 psi All respirator couplings provided with safety lock feature Please specify 1/4” Hansen style or Schrader style fittings when ordering. Other fittings available for an additional charge 2year warranty on Sensor & Monitor

The Air Systems BA-50 is engineered to accommodate the demanding requirements of the coating and sandblasting industry. Air is supplied to the Blast Air cart from plant or mobile air compressors & pre filtered through the high capacity particulate, oil, & water separators which are located at the rugged steel cart's rear section. The pre-filters will automatically drain a large amount of water and oil discharged from the compressor to prevent them from entering the Breather Box. This process extends the Breather Box's filter life & reduces costs and maintenance downtime. Includes an installed 50 CFM Breather Box

This confined space entry cart has 10 In. semi-pneumatic rugged tires & a triple cabinet design. Also features dual 14 in. deep shelves with a 28 in. deep shelf with a combination T-handle with pintle hitch. Features Steel cart rated for 1200 lbs. Nylon bottle straps & steel safety chains provide cylinder security Combo T handle w/ Pintle Hitch Steerable front end Upper rubber mat has tie downs to store retrieval tripod Cylinders, regulator & manifold assemblies are ordered separately Wheel chocks are available Size (W x L x H) - 30 x 72 x 48 inches Weight 515 pounds

This confined space entry cart has 10 In. pneumatic rugged tires & a triple cabinet design. Also features dual 14 in. deep shelves with a 28 in. deep shelf with a combination T-handle with pintle hitch. Features Steel cart rated for 1200 lbs. Nylon bottle straps & steel safety chains provide cylinder security Combo T handle w/ Pintle Hitch Steerable front end Upper rubber mat has tie downs to store retrieval tripod Cylinders, regulator & manifold assemblies are ordered separately Wheel chocks are available Size (W x L x H) - 30 x 72 x 48 inches Weight 515 pounds

Air Systems' innovative air cylinder cart has been ergonomically designed to help prevent back injuries and facilitate mobility. The Ergo-Air Cart features one-hand operation during raising or lowering of the air control panel and cylinders. Easy single handed operation while raising & lowering the air control panel & cylinder. The 5000 PSI air pressure regulator features a steel control panel with a four outlet respirator manifold & cart lift hooks. Also has high pressure hardware, an inline check valve & 16 inch rear semi-pneumatic tires accompanied by front-locking swivel casters. No back strain is placed on the operator during pushing or pulling the cart. The basic cart design comes standard with Air Systems' unique air control panel and cart assembly. Several hose reel options are available to meet particular job applications. Cylinders, breathing air hose and reel are ordered separately. Features 5000 PSI air pressure regulator Low pressure alarm whistle & (optional) bell alarm - hazardous location use permitted 4 outlet respirator manifold 16" semi-pneumatic rear tires and front locking swivel casters High pressure hardware w/ check valves In-line cart lifting hooks 2 cylinder straps & padded brackets Size (H x W x D) - 62 X 32 X 41 inches Available (optional) steel upper storage cabinet: Dimensions: 24” W x 12” H x 12” D Hose reel optional

Air Systems' innovative air cylinder cart has been ergonomically designed to help prevent back injuries and facilitate mobility. The Ergo-Air Cart features one-hand operation during raising or lowering of the air control panel and cylinders. Easy single handed operation while raising & lowering the air control panel & cylinder. The 5000 PSI air pressure regulator features a steel control panel with a four outlet respirator manifold & cart lift hooks. Also has high pressure hardware, an inline check valve & 16 inch rear semi-pneumatic tires accompanied by front-locking swivel casters. No back strain is placed on the operator during pushing or pulling the cart. The basic cart design comes standard with Air Systems' unique air control panel and cart assembly. Several hose reel options are available to meet particular job applications. Cylinders, breathing air hose and reel are ordered separately. Features 5000 PSI air pressure regulator Dual 9-volt electronic low pressure audible and visual alarms Remote audible and visual alarm jack on all electronic versions Not approved for hazardous locations 4 outlet respirator manifold 16" pneumatic rear tires and front locking swivel casters High pressure hardware w/ check valves In-line cart lifting hooks 2 cylinder straps & padded brackets Size (H x W x D) - 62 X 32 X 41 inches Available (optional) steel upper storage cabinet: Dimensions: 24” W x 12” H x 12” D Hose reel optional

The Drager Handy Pak and Rescue Pak are versatile air supply systems. They can act as the primary air source, or when used with an external high-pressure air source, they serve as a backup for emergency egress. Both systems can be used with 2 SCBA cylinders (2216 or 4500 psi) and are equipped with a low-pressure warning whistle. Pressure is regulated to four connections for airline respirators. The Handy Pak is lightweight and easily carried, where as the Rescue Pak has wheels that make transportation easier. The Rescue Pak also contains a fifth air connection with a dedicated regulator that provides air for another respirator or pneumatic tools. The Dräger Handy Pak and Rescue Pak are ideal for use in confined space entry; such as tank entry and cleaning, sewer maintenance operations, and other industrial applications. They are also applicable for emergency responders for use in extended Haz-Mat operations or the decontamination processes. Draeger Rescue Pak: Mobile air source 8” wheels Uses 2216 or 4500 psi SCBA cylinders Up to 4 respirator users (SAR or ALE Lite) 5th outlet for pneumatic tool Dual gauge for cylinder and outgoing pressures Store 50’ air hose on rear brackets

This rugged system has a standard eight worker Breather Box mounted onto a pre-filter cart. Breathing air may be fed to the cart system from plant or mobile air compressors & prefiltered through the high capacity oil, water & particulate separators which located at the cart's rear. These pre-filters will automatically drain oil & water discharged from the compressor before entering the Breather Box. This process will extend Breather Box filter life & reduce the cost of maintenance downtime. Features 100 cfm Breather BoxTM installed on the Blast-Air TM Cart (123 cfm flow capacity) - 8 couplings 2 - 300 cfm pre filters w/ automatic drains are cart mounted 1st stage filter with change indicator removes bulk water & particulate - 5.0 micron 2nd stage filter with change indicator - coalescing oil & ultrafine filtration for particulates - .01 micron 3rd stage filter with change indicator has charcoal to remove organic vapors & objectionable odors - .03 micron Automatic drains for 1st & 2nd stage filters 2 yr warranty for CO sensor & monitor Inline CO (carbon monoxide) monitor with (optional) co / o2 monitor (Intrinsically safe CSA compliant units available) Electro chemical sensor provides gas detection & rapid calibration in under 2 min. 2 - 9V battery, 8 to 16 VDC and / or 115 VAC operation 125 PSI safety relief valve setting Aluminum block solid manifold w/ manual drain 0 - 160 psi Pressure Gauge Visual Flowmeter to Verify Air Flow to Monitor External Case Mounted CO Warning Lights and Audible Alarm Remote DC Alarm Jack with Cover Cap, standard Maximum Inlet Pressure - 150 psi All respirator couplings provided with safety lock feature Please specify 1/4” Hansen style or Schrader style fittings when ordering. Other fittings available for an additional charge 2year warranty on Sensor & Monitor

Air Supply System - Handy Pak Portable Air Supply System, Dual Nature as Primary or Emergency Egress when used with a high-pressure air source, This unit lists for 2590.00, By Dräger P/N 4053879 Product Information; Handy Pak is a dual-nature air source. It can serve as a primary air source by using cylinders for breathable air or, when used with a high-pressure air source, the cylinders provide air for emergency egress. Handy Pak is ideal for use in confined spaces, HazMat response, tank entry and cleaning, sewer maintenance and chemical handling operations. Features and Benefits; * Lightweight and easily carried - Portable air source - Handy carry tray * Can be used with either one or two and 2216 or 4500 psi SCBA cylinders - Cylinders sold separately * 4-outlet air manifold with safety relief valves to support 4 respirators - (SAR orALE Lite) * System has dual pressure gauges (in-coming and out-going), and low pressure pneumatic whistle set @ 500 psi * System includes airline manifold with four Hansen brass 3000 series sockets * (To purchase other quick disconnects, contact our Customer Service please at besafe@safetyequipmentstore.com ) * Airline hose and quick disconnects purchased separately (maximum 300 feet, or 12 sections from manifold)

100 cfm Grade-D breathing air panel with intrinsically safe CO monitor - (123 cfm flow copacily)- 4 couplings or NPT outlet