Search in Category
SCBA (Self Contained Breathing Apparatus)
Filter Your Search
Brand
Browse Categories
Loading...
SCBA (Self Contained Breathing Apparatus)
Respiratory ProtectionSCBA (Self Contained Breathing Apparatus)
Viewing Page 7 of 62
(620 results)
AIR SYSTEMS INTERNATIONAL - AIR HP-CW1-346 - 4-Outlet Breathing Air Manifold
Items #:
AIR HP-CW1-346
Air Systems International 4-Outlet Breathing Air Manifold Assembly with Safety Relief Valve has a low-pressure alarm whistle and uses a 3,000 psig regulator. Manifold assembly provides CGA-346 connection and does not require cylinders. It requires 4 fittings for easy installation.
AIR SYSTEMS INTERNATIONAL - AIR MACK-2 - AIR DISTRIBUTION BOX W/FILL REG. ASSY.
Items #:
AIR MACK-2
This Command kit has a 4 manifold 5000 PSIG regulator and dual high pressure cylinder whips. It also has a low pressure alarm whistle & DC lamp which illuminates the case's interior. The CGA-347 high pressure inlet that enables uninterrupted operation for portable breathing air cylinders and large air storage cylinder banks that are truck mounted.
One or two SCBA cylinders provide air to the system. A CGA-347 high pressure inlet is also provided to allow continuous operation from truck mounted air cylinders. A low pressure regulator provides 0-125 psi air to a four outlet respirator manifold. A low pressure alarm whistle and a DC lamp to illuminate the case interior are provided as standard.
The MACK units have been designed as a series of portable air distribution boxes to meet the most demanding air handling needs of the Fire, Rescue, and Emergency Response industry. Designed and tested by professional firefighters to meet the rigorous industry and NFPA requirements. Manufactured to provide emergency low pressure breathing air from either SCBA cylinders or from a bank of large storage cylinders located on department vehicles.
Features
Air Distribution for Breathing, Filling, and Rescue Applications
Air outlet pressure adjustment from 0 -125 PSI
Suitable for hazardous locations and meets NFPA requirements
4 outlet manifold
5000 PSI regulator
2 - high pressure cylinder whips
High pressure fill regulator
1 fill whip (optional 2nd fill whip available for installation)
High pressure inlet port
AIR SYSTEMS INTERNATIONAL - AIR PAK-4 - RESCUE PORTA-PAK
Items #:
AIR PAK-4
This rescue cart also has independent cylinder check valves and a low pressure air regulator for pneumatic tools.
Features
CGA-347 operation @ 4500 PSI
Adjustable velcro cylinder straps
High pressure 3 way directional cylinder valve
Male high pressure inlet - CGA-347
Low pressure pneumatic tool regulator
8 inch dia. ball bearing wheels
Output regulator is adjustable - with relief valve
Check valves inline
Telescopic aluminum handle
Rear hose rack
Air cylinder tray is removable
Low pressure alarm whistle
Size (H x W x D) - 33 x 25 x17 inches
Weight 37 pounds (no cylinders)
AIR SYSTEMS INTERNATIONAL - AIR PAK-CRTC - PORTA-PAK CART COVER - ALUMINUM
Items #:
AIR PAK-CRTC
Air Systems International PORTA-PAK™ 29" X 21" X 6" Cart Cover has orange powder coated aluminum frame with padded carry handles.
AIR SYSTEMS INTERNATIONAL - AIR PFE-2424PF - PRE-FILTER - 24 X 24 X 1 (PK/10)
Items #:
AIR PFE-2424PF
Air Systems International Pre-Filter Pad measuring 24" X 24" X 1" is designed for Fume-Air™ 750 fume extractor.
AIR SYSTEMS INTERNATIONAL - AIR PFE-750-8 - PORTABLE FUME EXTRACTOR W/ARM-750 CFM
Items #:
AIR PFE-750-8
The Fume-Air has a 12.5 Amp 115 Volt AC motor with a HEPA filter and 10 foot long arm assembly. The Fume-Air TM 750 HEPA filtered fume extractor provides 750 cfm flow through a 13” hood and is ideal for welding and soldering applications where large flow volume is required. With 270 degree movement and 10 foot arm, it is easy to position the hood next to the workpiece.
The pleated pre-filter and HEPA filter remove 99.97% at 0.3 micron and meets the OSHA Permissible Exposure Limit (PEL) for hexavalent chromium of 5 µg/m³.
Features
Source Capture to Meet OSHA Standards
115 VAC motor, 12.5 amps
Flow damper & 13 inch fume capture hood
(Optional) hood lighting
99.97% HEPA filter, UL-586 approved, DOP Tested 1000 cfm flow rate
Filter change indicator
24 X 24 X 1 inch pleated pre-filter holder & easy access lift up door allows easy filter changes
Heavy duty 5 inch casters
Perfect for soldering & welding applications
750CFM free air
Steel Cabinet
12.5A, 15VDC motor
Size - 27 X 32.5 X 40 inches
Weight 307 pounds
AIR SYSTEMS INTERNATIONAL - AIR PFE-750CAB - "PORTABLE FUME EXTRACTOR, NO ARM, W/HEPA
Items #:
AIR PFE-750CAB
The Fume-Air has a 12.5 Amp 115 Volt AC motor with a HEPA filter with no arm assembly. The pleated pre-filter and HEPA filter remove 99.97% at 0.3 micron and meets the OSHA Permissible Exposure Limit (PEL) for hexavalent chromium of 5 µg/m³.
Features
Designed for permanent central duct systems
115 VAC motor, 12.5 amps
Flow damper & 13 inch fume capture hood
(Optional) hood lighting
99.97% HEPA filter, UL-586 approved, DOP Tested 1000 cfm flow rate
Filter change indicator
24 X 24 X 1 inch pleated pre-filter holder & easy access lift up door allows easy filter changes
Heavy duty 5 inch casters
Perfect for soldering & welding applications
750CFM free air
Steel Cabinet
12.5A, 15VDC motor
Size - 27 X 32.5 X 40 inches
Weight 307 pounds
