Browse Categories

Search in Category

Eyewash and Shower Equipment

Browse Categories

Loading...

Eyewash and Shower Equipment

Eyewash and Shower Equipment 
Viewing Page 13 of 17 (161 results)

Haws Corporation - HAW 9015 - Plastic eyewash gauges (Quantity of 6)

Items #: HAW 9015

Model 9015 eyewash gauge allows for easy testing of eyewashes per ANSI Standard Z358.1. Directions are in black on the clear Acrylic. Model 9015 also serves as a 6" (15 cm) ruler.
Call For Availability
UOM : EA
$17.00


Add to Quote
Previous Purchase

Haws Corporation - HAW 9070 - Filter for eyewashes

Items #: HAW 9070

Model 9070 Filter is recommended for installation on all eyewash units for additional protection for eyes. Made of FDA approved polypropylene with disposable FDA approved viscose fiber filter media which removes particles down to 20 microns. Flow Capacity: 7 gpm (17.8 L) max (recommended). Maximum Working Pressure: 125 psi (8.62 bar) Size: 15" (38.1 cm) overall by 5" (12.7 cm) diameter Supply: 3/4" IPS inlet and outlet.
Call For Availability
UOM : EA
$244.00


Add to Quote
Previous Purchase

Haws Corporation - HAW 9070C - Cartridge for filter

Items #: HAW 9070C

Model 9070C is the replacement cartridge for Model 9070 Filter.
Call For Availability
UOM : EA
$64.50


Add to Quote
Previous Purchase

Haws Corporation - HAW 9094(PAIR) - Dust cover for SP12 Soft-Flo heads

Items #: HAW 9094(PAIR)

Model 9094 Dust Cover is for use on all Haws Portable Eyewash Units that feature the SP12 Soft-Flo heads. It keeps eyewash heads from contamination when not in use. The Safety Green polyethylene plastic cover with integral retainer strap automatically removes when water is turned on. Sold in pairs.
Call For Availability
UOM : EA
$20.55


Add to Quote
Previous Purchase

Haws Corporation - HAW 9095(PAIR) - Dust cover for SP10, SP11, SP11FC, SP18

Items #: HAW 9095(PAIR)

Model 9095 Dust Cover is for use on all Haws Non-Portable Eyewash Units that feature the SP10, SP11, SP11FC or SP18 Soft-Flo heads. It keeps eyewash heads from contamination when not in use. The Safety Green polyethylene plastic cover with integral retainer strap automatically removes when water is turned on. Sold in pairs.
Call For Availability
UOM : EA
$23.00


Add to Quote
Previous Purchase

Haws Corporation - HAW 9125 - Thermal protection jacket for the 7500

Items #: HAW 9125

Model 9125 is a thermal protection jacket. Recommended for areas where extreme heat or sunlight might cause water to overheat.
Call For Availability
UOM : EA
$634.00


Add to Quote
Previous Purchase

Haws Corporation - HAW 9201H - Low-lead, tempered water blending system

Items #: HAW 9201H

A flow rate of 1 to 31 gpm (3.8 to 117.3 L) for better temperature control across the operating range AXION's superior design and technology provide a complete safety solution for increased victim comfort. Lowest internal pressure drop for this class of valve (advantage where supply pressure is low) Wax based thermostat technology for fast response time with proven highly reliable temperature control Highest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate) Modular lead-free brass design with internal check stops Oversized valve seats resist failures caused by foreign matter A new and efficient shuttle design eliminates valve sticking A custom funnel design improves temperature control at low flow rates Outlet temperature is factory set to 85° F (29° C) Tempered water: High temperature limit is factory set to 87° F (30° C) Cold water by-pass valves are closed during normal operation, regardless of flow rate
Call For Availability
UOM : EA
$2,595.00


Add to Quote
Previous Purchase

Haws Corporation - HAW 9202E - Tempered water blending system,

Items #: HAW 9202E

A flow rate of 1 to 78 gpm (295 L) for better temperature control across the operating range Lowest internal pressure drop for this class of valve (advantage where supply pressure is low) Wax based thermostat technology for fast response time with proven highly reliable temperature control Highest Cold Water Bypass flow rate in the industry (64% of rated tepid flow rate) Modular brass design with internal check stops Over-sized valve seats resist failures caused by foreign matter A new and efficient shuttle design eliminates valve sticking A custom funnel design improves temperature control at low flow rates Outlet temperature is factory set to 85° F (29° C). Tempered water: High temperature limit is factory set to 90° F (32° C). Cold water by-pass valves are closed during normal operation, regardless of flow rate.
Call For Availability
UOM : EA
$1,780.00


Add to Quote
Previous Purchase

Haws Corporation - HAW MK81A - Freeze-resistant shower valve, 1-1/4in

Items #: HAW MK81A

Model MK81A is a special freeze-protected valve that drains water from Model 8300FP combination shower/eyewash after closing to prevent freezing. 1-1/4" MIPS inlet. Standard sizes are 60" and 78" (152.4 and 198.1 cm) for bury depths of 24" and 42" (61 and 106.7 cm) respectively. Servicing Instructions: For replacement of damaged parts, order the VRKMK81A repair kit which includes packing, stuffing box, stuffing box nut, spring and plunger assembly with four O-rings.
Call For Availability
UOM : EA
$1,049.00


Add to Quote
Previous Purchase

Haws Corporation - HAW MK8A - Freeze-resistant eye/face wash valve,

Items #: HAW MK8A

Model MK8A is a special freeze-protected valve that drains water from Model 8300FP combination shower/eyewash after closing to prevent freezing. 3/4" MIPS inlet. Standard sizes are 60" and 78" (152.4 and 198.1 cm) for bury depths of 24" and 42" (61 and 106.7 cm) respectively. Servicing Instructions: For replacement of damaged parts, order the VRKMK8A repair kit which includes packing, stuffing box, stuffing box nut, spring and plunger assembly with four O-rings.
Call For Availability
UOM : EA
$863.00


Add to Quote
Previous Purchase
  • « PREV
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • NEXT »