General First Aid

PVP Iodine Wipes, 10/box

Stretcher

North® By Honeywell Redi-Care™ 4 3/4" X 5" X 2 1/2" Small First Aid Kit adhesive bandage for fingertip/knuckle, adhesive bandage of size 1" X 3", adhesive tape of size 1/2' x 2 1/2 yds. It comes with gauze compress of size 18" X 36", burn cream with aloe, first aid guide and pointed plastic forceps. It features sterile gauze pads of size 3" X 3", instant cold pack, poison cold directory, PVP iodine wipes, scissors, nitrile medical gloves and non-sterile triangular bandage. It finds application for construction, manufacturing, medical, municipal services, nuclear, pharmaceutical, oil or gas industries. Features Multi-purpose first aid kits with a variety of supplies to treat wounds, cuts, and other emergency medical needs Stored in rugged soft sided nylon bags that are light weight and easy to carry Their portability makes it easy for the first responder to carry them to the site of an emergency

Manufactured By Allegiance-Jack Frost"Please Note: Photo may NOT represent actual item, please refer to title for all detais"Manufacture Pt# 107

Kit consists of the: Fire Blanket (JSA-1002) 62" x 82" Fire Resistant Treated 100% Wool (weight 3-1/2 lbs.) Sturdy Steel Cabinet (JSA-1000-CW) ready for wall mounting. Cabinet is bright Red Enamel with White lettering. DIMENSIONS: 23-7/8" L x 8-1/2" W x 6-1/2" H WEIGHT: 12 lbs.

The Junkin fire blanket measures 62" x 84" and is made from 100% processed wool. This blanket is treated with a fire-resistant chemical for extra protection. The blanket is machine washable and comforms to Federal Flammable Fabrics Act CS-191-53. Fire blanket Made from 100% processed wool 62" x 84" Machine washable Meets Federal Flammable Fabrics Act CS-191-53

FIRE BLANKET W/BAG

Kit consists of JSA-1002 Fire Blanket and PVC Plastic Canister complete with mounting brackets. Finished bright red and white lettering. Blanket ejects at bottom when opened. Rust and dust proof. Designed for use where corrosion and dust are a problem. DIMENSIONS: DIAMETER: 8", HEIGHT: 24" WEIGHT: 14 LBS. CAN SHIP VIA UPS

Junkin Safety Head & Neck Immobilizer Designed and recommended for immobilization only. Items included are: (2) Head support pillows with ear openings (2) Removable straps with center pads for head positioning (2) Straps to secure the base pad to the board (1) Base pad (1) Removable pad (to accommodate smaller heads) Self adhesive Velcro R loop or tape for positioning base pad near head of board For replacement foam pads order JSA-363-R (2 pads per pack) Instructions For Use Attaching The Head Immobilizer To The Spine board Make sure head immobilizer is taken apart. You should have 1 base plate, 2 head blocks and 2 head/chin straps. Place base plate against top of spine board with attached straps stretched out. The straps attached to the base plate loop over and then through the handle running the strap in-between the board and the base plate. The run strap through and over other handle and attach strap to Velcro on base plate. Repeat with 2nd strap. Attach retention strap at top of base plate by looping through center hole of spine board. Attach head blocks to Velcro and place head/chin straps over blocks and loop Velcro ends through D rings on base plate. Securing the patient in the Head Immobilizer Position the patient on the backboard so that their head is positioned in the middle of the base plate. Secure the patient on the backboard with restraining straps. Place the head blocks against each side of the patients head. When possible align the holes in the head blocks with the patient's ears so you can hear the patient. Loop each end of the forehead/chin straps through the D rings. Tighten as needed. The head immobilizer is vinyl coated and is both buoyant and waterproof. It can be left in place during X-rays.

Vinyl First Aid Cot Bag is for a bag for the first aid cot.