Hard Hats
Viewing Page 3 of 21
(207 results)
Honeywell BW - NSA A79R030000 - HAT SAF 4P RATCH A79R ORANGE
Items #:
NSA A79R030000
Brand: Honeywell BW
Peak Series Cap-Style Hard Hats have three level height adjustments to create the proper fit quickly and easily. Hats have a grooved outer shell and rain trough to help guide water away from the face. There's also an additive in the HDPE construction that protects the face and head from UV rays. All hats have accessory slots, 4-point suspensions, and meet ANSI Z89.1, Type I, Class E
Safeware Authorized Supplier - NSA A79R040000 - HAT SAF 4P RATCH A79R DK. GRN
Items #:
NSA A79R040000
Brand: Safeware Authorized Supplier
Hard Hat, Style Front Brim, Color Green, Graphics None, ANSI Type 1, ANSI Class E, Fits Hat Size 6-1/2 to 8, Venting No, Accessory Slots Yes, Suspension 4 pt. Ratchet, Shell Material High Density Polyethylene, Standards ANSI Z89.1-2009
Features
Color : Green
Item : Hard Hat
Style : Front Brim
ANSI Type : 1
Class : E
Suspension : 4 pt. Ratchet
Venting : No
Standards : ANSI Z89.1-2009
Shell Material : High Density Polyethylene
Sub-Category : Hard Hats Without Graphics
Graphics : None
Fits Hat Size : 6-1/2 to 8
Accessory Slots : Yes
ANSI Class : E
Hard Hat Sub-Category : Hard Hats Without Graphics
Safeware Authorized Supplier - NSA A79R080000 - HARD HAT NAVY W/4PT RATCHET
Items #:
NSA A79R080000
Brand: Safeware Authorized Supplier
Quick Overview
All suspension choices feature 3-level height adjustment
Pin lock adjustment is a sturdy, easy to use 4 point pin lock headband
Ratchet adjustment headband offers a firmer and more comfortable fit
Versatile and dependable design, with grooved HDPE out shell, rain trough and accessory slots Color Navy Blue Suspension 4 Point Adjusting Method Ratchet Material HDPE Wt. 0.93 lb UPC 821812675251 UNSPSC 46181700 Standard Pack 20EA/CASE Minimum Order 1/EA Country of Origin US Hazmat No
Honeywell BW - NSA A79R090000 - HAT SAF 4P RATCH A79R GREY
Items #:
NSA A79R090000
Brand: Honeywell BW
Features and Benefits
Type I hard hats are used to reduce the force of impacts from falling overhead.
Class E hard hats are used for electrical applications and protect against contact with high voltage conductors. They have the highest rating and are tested at 20,000 volts AC for three minutes. Class E hard hats also meet Class G and Class C regulations. Class E was formerly designated Class B.
Ratchet adjustments systems are designed with a knob for turning and locking into place.
Specs
Hard Hats; Type: Standard; ANSI Type: I; Class Rating: E; Suspension Type: 4-Point; Adjustment: Ratchet; Slotted (Yes/No): Yes
Type Standard
ANSI Type I
Class Rating E
Suspension Type 4-Point
Adjustment Ratchet
Slotted (Yes/No) Yes
Vented (Yes/No) No
Color Gray
Hard Hat Graphics None
Material High Density Polyethylene
Suspension Material Nylon
Honeywell BW - NSA A79R110000 - HAT SAF 4P RATCH A79R BLACK
Items #:
NSA A79R110000
Brand: Honeywell BW
Item Details
North By Honeywell Black Peak A79 Hardhat with a 4-point nylon suspension and ratchet size adjustment makes it easy to use. All suspension choices feature 3-level height adjustment. Hardhat features grooved HDPE out shell, rain trough and accessory slots. Application area includes chemical, construction, food services, forestry, government, manufacturing, mining, municipal services, oil and gas, steel and metals, transportation, utilities welding and wind energy. Sturdy and comfortable fit hardhat, meets ANSI Z89.1-2009, CSA Z94.1-2005 and type I class E specifications.
Features
A versatile and dependable design
Grooved HDPE outer shell
Rain trough and accessory slots
4-point plastic suspension
Pin lock or ratchet size adjustment with 3 level height adjustment
Specifications
ANSI Z89.1 2009
CSA Z94.1 2005
Applications
Chemical
Construction
Food services
Forestry
Government
Manufacturing
Mining
Municipal services
Oil and gas
Steel and metals
Transportation
Utilities
Welding
Wind energy
Product Attributes
Cap Type
» Hard Hat
Suspension
» 4-Point Ratchet
Material
» HDPE
Brand Name
» Peak A79
Cap Class
» E
ANSI Type
» I
Color
» Black
Safeware Authorized Supplier - NSA A79R150000 - HAT SAF 4P RATCH A79R RED
Items #:
NSA A79R150000
Brand: Safeware Authorized Supplier
Hard Hat, Style Front Brim, Color Red, Graphics None, ANSI Type 1, ANSI Class E, Fits Hat Size 6-1/2 to 8, Venting No, Accessory Slots Yes, Suspension 4 pt. Ratchet, Shell Material High Density Polyethylene, Standards ANSI Z89.1-2009
Features
Color : Red
Item : Hard Hat
Style : Front Brim
ANSI Type : 1
Class : E
Suspension : 4 pt. Ratchet
Venting : No
Standards : ANSI Z89.1-2009
Shell Material : High Density Polyethylene
Sub-Category : Hard Hats Without Graphics
Graphics : None
Fits Hat Size : 6-1/2 to 8
Accessory Slots : Yes
ANSI Class : E
Hard Hat Sub-Category : Hard Hats Without Graphics
PIP - PIP 280-AHS150-10 - Mk8 Evolution Hard Hat, White
Items #:
PIP 280-AHS150-10
Brand: PIP
Applications:
Ideal for use in environments where high impact/side impact situations are of concern, such as construction, mining, oil & gas, demolition, high pressure jetting, energy companies and certain emergency services.
Features:
Offers side (lateral) impact protection, as well as side penetration protection.
Expanded Polystyrene (EPS) Impact Liner helps absorb the forces of impact.
High-Density Polyethylene (HDPE) shell.
Deluxe polyester strap suspension with crown pad webbing.
Ratchet suspension allows user to adjust while wearing.
Lightweigh_& only 19 ounces.
Conforms to ANSI Z89.1-2009 Type II Class E, G, & C; also European standard EN14052.
Applications:
Protection from high or side impact situations
Construction
Mining
Oil
Gas
Demolition
High pressure jetting
Energy companies
Emergency services
MK8 data:
MK8 Test Data
PIP - PIP 280-AHS150-50 - MK8 Evolution Hard Hat, Blue
Items #:
PIP 280-AHS150-50
Brand: PIP
Features -
This hard hat meets the ANSI Z89.1-2009 standard for Type II impact protection, as well as, the European standard EN14052. A high density liner and comfortable harness system create the ultimate in quality hard had protection and wear.
• Not only meets, but exceeds ANSI Z89.1-2009 Standard for Type II, Class E, G and C
• Side (lateral) Impact Protection reduces the force of impact, which results from a blow, which may be received off center as well as to the top of the head
• The Expanded Polystyrene (EPS) Impact Liner helps to absorb that force of the impact, providing side, front and rear impact protection
• The shell is made of High-Density Polyethylene (HDPE) for high strength, with all round protection down to 60 degrees from vertical
• The hard hat is easy to adjust while wearing, due to the ratchet suspension; intuitive thumb and forefinger press points allows for the easy adjustment of the wheel ratchet
• The universal accessory slots allow for the versatility of different attachments
Applications -
• Head Protection
• Construction
• Mining
• Oil and Gas
• Demolition
• High Pressure Jetting
• Energy Companies
• Particular Emergency Services (FEMA and USAR)
Specifications –
Table Error! Use the Home tab to apply 0 to the text that you want to appear here..1
Manufacturer's SKU 280-AHS150-50
UPC / ISBN 5038428120326
Brand PIP
Additional No
Safety Info No
Shipping Weight 0.7500
Hat Material Shell: High-Density Polyethylene
Hat Suspension Ratchet
Standards Met Conforms to ANSI Z89.1-2009 Type II Class E
Strap Material LDPE
Color Blue
Product Weight (lbs.) No
Condition New
Manufacturer's Warranty Product Defects Only
Return Policy Unopened Only, 30 Days
Addl Specs • Harness Material: Polyester webbing straps and microfiber comfort padding
• Size: One Size Fits All
• Hat Size: 6-5/8 - 8 Inches
Laundering Instructions:
• The hard hat can be cleaned with soap and warm water. Dry with a soft cloth. Do not clean with chemical or abrasive cleaners. Store helmet out of direct sunlight, away from chemical and not exposed to extremes of temperatures.
Video No
PIP - PIP 280-AHS240-10 - Mk8 Linesman Hard Hat, White
Items #:
PIP 280-AHS240-10
Brand: PIP
The MK8 Evolution meets the ANSI Z89.1-2009 standard for Type II impact protection. However, it is also the only industrial safety helmet in the world at this time meeting and exceeding the new, tougher European standard EN14052, the biggest advance in industrial head protection in over 45 years.
The high-density EPS liner and ultra comfortable harness ensure maximum protection in the highest risk environments without compromising comfort.
But most importantly, MK8 Evolution provides protection from SIDE IMPACTS and SIDE PENETRATION to the same level as ANSI Z89.1 Type I testing, with almost 20 times the coverage area.
Key Features:
Mounted 4-point chin strap harness
Chin strap ANSI approved for retention on Type II helmet
Provides a secure fit in the most extreme conditions
Meets ANSI/ISEA Z89.1-2009, Type II, Class E requirements
Offers Side (Lateral) Impact Protection which reduces the force of impact resulting from a blow which may be received off center as well as to the top of the head
Also offers Side Penetration Protection in addition to crown penetration
Expanded Polystyrene (EPS) Impact Liner helps absorb the forces of impact
High-Density Polyethylene (HDPE) Shell
Deluxe Polyester Textile Strap Suspension with microfiber crown pad webbing
Wheel Ratchet Adjustment allows user to easily adjust fit while wearing
Universal Accessory Slots
Industries:
Protection from high or side impact situations
Construction
Mining
Oil
Gas
Demolition
High pressure jetting
Energy companies
Emergency services
Part Number:
280-AHS240-10
PIP - PIP 280-AHS240-50 - Mk8 Linesman Hard Hat, Blue,
Items #:
PIP 280-AHS240-50
Brand: PIP
Product Description
The MK8 Evolution meets the ANSI Z89.1-2009 standard for Type II impact protection. However, it is also the only industrial safety helmet in the world at this time meeting and exceeding the new, tougher European standard EN14052, the biggest advance in industrial head protection in over 45 years.
The high-density EPS liner and ultra comfortable harness ensure maximum protection in the highest risk environments without compromising comfort.
But most importantly, MK8 Evolution provides protection from SIDE IMPACTS and SIDE PENETRATION to the same level as ANSI Z89.1 Type I testing, with almost 20 times the coverage area.
JSP MK8 Evolution for Linesman Features:
Mounted 4-point chin strap harness
Chin strap ANSI approved for retention on Type II helmet
Provides a secure fit in the most extreme conditions
Meets ANSI/ISEA Z89.1-2009, Type II, Class E requirements
Offers Side (Lateral) Impact Protection which reduces the force of impact resulting from a blow which may be received off center as well as to the top of the head
Also offers Side Penetration Protection in addition to crown penetration
Expanded Polystyrene (EPS) Impact Liner helps absorb the forces of impact
High-Density Polyethylene (HDPE) Shell
Deluxe Polyester Textile Strap Suspension with microfiber crown pad webbing
Wheel Ratchet Adjustment allows user to easily adjust fit while wearing
Universal Accessory Slots