Sample Lines, Pumps, and Tubes

DT Acetytaldehyde 100/a (10)

Product Specific Information; Dräger Tubes - Epichlorohydrine 5/c, 5-80 ppm, Short-term Tubes, 10 tests per box, By Draeger, P/N 6728111 Standard Measuring Range: 5 to 80 ppmNumber of Strokes n: 20Time for Measurement: approx. 8 minStandard Deviation: ± 15 to 20 %Color Change: pale gray yellow orangeAmbient Operating ConditionsTemperature: 10 to 40 °CAbsolute Humidity: 5 to 15 mg H2O / LReaction PrincipleEpichlorohydrin + Cr VI Cl2Cl2+ o-tolidine yellow orange reaction productCross SensitivityOther chlorinated hydrocarbons are indicated as well but withdifferent sensitivities. It is not possible to measure epichlorohydrinein the presence of free halogens and hydrogen halides in the TLVrange because they are indicated as well. Petroleum hydrocarbonscause low readings.

DT Hydrochloric Acid 50/a (10)

Replacement Smoke Tubes

Air cyl. 4500psi, CFK (60 min) 4500 PSI / 60 Minute Blue Cylinder (Full)

The Dräger HazMat Simultest Kit is based on HazMat Simultest Sets I, II and III. These specially developed and calibrated 5-tube sets are used to detect gases and vapors commonly encountered during a chemical leak or spill. Each semi-quantitative test takes one minute or less to conclude, therefore the complete testing time to identify and measure 15 chemicals or chemical families is less than 5 minutes. Like all Draeger Response Kits, the HazMat Simultest has easy to read, full color laminated instruction cards that summarize the simple sampling procedure and provide a quick reference for interpretation of color changes in the tube sets. The Kit also includes an Air Current Kit to determine relative air speed and direction and has room for supplemental short-term detector tubes to better define concentrations and limits of affected areas for the now identified substance. Sets I and II can also detect the gases and vapors generated as the result of a structural fire. The Simultest Sets found in the Hazmat Simultest and CDS Kits can be combined in special "hybrid" kits that exhibit maximum gas detection capabilities. Any of the Kits that use Simultest Sets can also utilize the Quantimeter, an intrinsically safe automatic sampling pump for additional sampling utility. Designed primarily for the municipal fire service and other emergency responders, this kit quickly identifies and quantifies a wide range of chemical substances using the Dräger Simultaneous Test Sets. The Simultaneous Test Sets are sets of five specially matched Dräger Tubes designed to be the fastest, simplest and most comprehensive means hazardous material identification. The HazMat Simultest Kit includes three Simultaneous Test Set Kits for measuring 15 different Organic and Inorganic chemicals and/or chemical families. With each set requiring less than one-minute analysis time, the entire process takes less than 5 minutes to complete. The complete kit contains: accuro® Bellows Pump, 10 Simultaneous Test Sets, Simultaneous Test Set Adapter w/Extension Hose, Simultaneous Test Set and Deluxe Tube Openers, Laminated Instruction Cards, Air Current Kit, Pelican Case and Custom Foam, Space for 6 Additional Boxes of Chemical Specific Dräger, Tubes Three each of Simultaneous Test Set I (tests for hydrogen chloride, hydrogen cyanide, carbon monoxide, ammonia, and nitrous fumes) Three each of Simultaneous Test Set II (tests for sulfur dioxide, chlorine, hydrogen sulfide, carbon dioxide, and phosgene) Four each of Simultaneous Test Set III (tests for alcohols, aliphatic hydrocarbons, aromatics, chlorinated hydrocarbons, and ketones)Hard-plastic carrying case - See more at: https://store.federalresources.com/identification/gas/kits/hazmat-simultest-kit.html#sthash.l1hamWqm.dpuf

HazMat Simultest Kit w/o Pump

TUBING CONNECTORX-AM 1/2/5000 PUMP

Draeger Extension Hose, 10 meter, for Dräger accuro® & Dräger X-act 5000, Draeger 6400078 Includes adapter for accuro®and & Dräger X-act 5000 and tube holder.

Chip Carbon Dioxide 1000-25000 ppm