Brand
Janitorial Supply
Janitorial Supply
Viewing Page 7 of 18
(176 results)
Mutual Industries Inc. - MUT 14980-0-600 - Poly 3-Strand 1/4 in Safety Rope, 600 ft
Items #:
MUT 14980-0-600
3-Strand Twisted Polypropylene Safety Rope. Our safety yellow and black rope is highly visible and weather resistant. 600 ft.long. Black/Yellow. Tensile Strength: 1490 lb. Spool.
Mutual Industries Inc. - MUT 14991-79 - Red Pennant Flags, 60 Feet Per Roll
Items #:
MUT 14991-79
Pennant flags come in 60' long strings containing 36 solid red 9" x 12" pennants
Safeware Authorized Supplier - AER 312 - Spray Paint Flat Black Enamel
Items #:
AER 312
Brand: Safeware Authorized Supplier
Spray Paint Flat Black Enamel 16 oz (12 oz) 6 cans per case, Rust proof, Solvent based, aerosol.
AIR SYSTEMS INTERNATIONAL - AIR AV-15B - PAPER BAGS - 15 GAL. (5/PK)
Items #:
AIR AV-15B
Vacuum Cleaner Bags; Bag Type: Vacuum Bag; Material: Paper; Vacuum Tank Capacity (Gal.): 15.00
AIR SYSTEMS INTERNATIONAL - AIR AV-15P-CND - PNEUMATIC 15 GAL.VAC SYSTEM-STATIC COND.
Items #:
AIR AV-15P-CND
Air Systems International AV-15P-CND AV 15P CND Pneumatic HEPA Vacuum
The Air Systems AV-15P-CND is a conductive pneumatic HEPA filter vacuum perfect for operating in wet environments.
The AV-15P-CND is ideal for working under wet environmental conditions or in places that require a long length of vacuum hose. Pneumatically powered motors require zero maintenance and have no moving parts. It includes a pressure relief built in valve which restricts the water lift to a maximum of 160 inches in order to prevent the tank from collapsing. Includes an on / off valve for flow & pressure gauge.
Safely removes build ups of potential static charges
AV-15P-CND Features
80psi Inlet Pressure with 1.5 inch I.D. hose
Recovery Tank: 15 Gallon
Spark free motor
Required inlet flow - 70 cfm
250 inch maximum water lift adjusted to 160 inches w/ relief valve
100 - 170 cfm of Vacuum Flow - inlet pressure based
75 dbA at 90 PSI - inlet pressure
Stainless Steel Tank - cart included
Two-piece aluminum wand and tools (all aluminum - non sparking)
Supplied with 10 feet, 1.5 inch conductive hose with cuffs - grounds to the tank
Ground wire for motor head (attached via vacuum recovery can)
25 foot grounding wire attached to vacuum recovery canister for attachment to external grounded device - removes static
Air Systems International - AIR SVB-G8CUP - Gas Blower Kit
Items #:
AIR SVB-G8CUP
Brand: Air Systems International
The saddle vent ventilator provides continuous access to the manhole for either entry or egress. Traveling in and out of the confined space can now be done quickly and safely. The Saddle Vent increases worker productivity as well as the ability to perform confined entry rescue. The entire Saddle Vent system can be completely set up in less than five minutes. Eight inch air duct is installed on the bottom of The Saddle Vent and run to the bottom of the manhole. This allows fresh air to be supplied to the workers and displace any harmful gases that may be deadly for the occupants. The use of the 90 degree elbow removes the severe kink in the air duct and allows for rotation of the intake duct to any desired position at the street level. The kit includes SVB-G8 blower and SV -CUP saddle vent ventilation kit.
