Search in Brand
AIR SYSTEMS INTERNATIONAL
Search term required.
Filter Your Search
Category Group
No Filtered Results...
Browse Categories
Loading...
Search Results
Searching for: air-systems-international
Viewing Page 7 of 68
(678 results)
AIR SYSTEMS INTERNATIONAL - AIR BB100-CO4R - BREATHER BOX SYSTEM W/4 INDEP.REGULATORS
Items #:
AIR BB100-CO4R
It also has standard filter change indicators for for all 3 filtration stages.
The Breather Box is a portable Grade-D filtration system designed to provide breathing air for a specific number of workers. The system filters incoming air from a compressor to provide respirator users with Grade-D quality air and monitors for CO.
The first stage element filters bulk water and particulate and has an auto drain. The second stage coalescing filter eliminates atomized oils, mists, ultra-fine particulates, and has an auto drain. The third stage filter removes organic vapors and odors and has a manual drain. Filter change indicators are standard on all three stages of filtration. Filtration efficiency is 99.99% @ .01 micron. All Breather Boxes are designed to be used in the upright and closed position to prevent internal contamination.
The standard carbon monoxide (CO) airline monitor operates on 8-16 volt DC, or 115 VAC for continuous air monitoring. An external audible alarm and light signals the workers of high CO content. Point-of-Attachment (POA) boxes can extend respirator usage beyond 300 feet.
Features
100 cfm Breather Box - (123 cfm flow capacity)
4 couplings
4 independent regulators and pressure gauges
99.99 percent filtration efficiency @ .01 micron
9 Volt disposable batteries
External light & alarm signals
Remote alarm jack
Canadian Z180.1
BS-EN 12021:1999
OSHA 1910.134
Please specify 1/4” Hansen style or Schrader style fittings when ordering. Other fittings available for an additional charge
AIR SYSTEMS INTERNATIONAL - AIR BB100-COPM - BB100-CO PANEL MOUNT - 4 FITTINGS
Items #:
AIR BB100-COPM
The system filters compressor air to provide respirator users with Grade-D quality air. The first stage element filters bulk water and particulate, the second stage coalescing filter removes atomized oils and ultra-fine particulate, and the third stage removes organic vapors and odors. Filter change indicators are standard on all three filtration stages. Filtration efficiency is 99.99% @ .01 microns. A built-in carbon monoxide monitor operates on 115 VAC, or 8-16 VDC for continuous detection. A high intensity audible alarm and light signals the workers of high CO content in their breathing air. A 115 VAC electrical conduit box is provided as standard to provide AC power in and connection for AC powered remote alarms. Filtration components are mounted on powder coated steel panel.
Features
100 CFM (123 CFM flow capacity)
CO carbon monoxide monitor
99.99 percent filtration efficiency @ .01 microns
4 couplings or NPT outlet
Integrated carbon monoxide (CO) monitor uses 115 Volts AC or 8 to 16 Volts DC for continuous detection
Audible high intensity alarm & light will signal workers to high CO in breathing air supply
All portable and fixed breathing air filtration systems meet or exceed OSHA 1910.134, Canadian Z180.1 Breathing Air Standards and British Standard BS-EN 12021:1999 “RESPIRATORY PROTECTIVE DEVICES”
All filtration units are designed to flow the NIOSH maximum capacity per worker
Air Systems provides at NO CHARGE your first lab certified air quality test of your new breathing air filtration device
Please specify 1/4” Hansen style or Schrader style fittings when ordering. Other fittings available for an additional charge.
Air Systems International - AIR BB100-D - Replacement Charcoal Filter, 100-175 CFM
Items #:
AIR BB100-D
Brand: Air Systems International
Replacement Charcoal Filter, 100-175 CFM (D) filter element. For BB100-CO breather box series
AIR SYSTEMS INTERNATIONAL - AIR BB30-CO3 - 30 CFM BREATHER BOX FILTRATION SYSTEM
Items #:
AIR BB30-CO3
It also has standard filter change indicators for for all 3 filtration stages.
The Breather Box is a portable Grade-D filtration system designed to provide breathing air for a specific number of workers. The system filters incoming air from a compressor to provide respirator users with Grade-D quality air and monitors for CO.
The first stage element filters bulk water and particulate and has an auto drain. The second stage coalescing filter eliminates atomized oils, mists, ultra-fine particulates, and has an auto drain. The third stage filter removes organic vapors and odors and has a manual drain. Filter change indicators are standard on all three stages of filtration. Filtration efficiency is 99.99% @ .01 micron. All Breather Boxes are designed to be used in the upright and closed position to prevent internal contamination.
The standard carbon monoxide (CO) airline monitor operates on 8-16 volt DC, or 115 VAC for continuous air monitoring. An external audible alarm and light signals the workers of high CO content. Point-of-Attachment (POA) boxes can extend respirator usage beyond 300 feet.
Features
CO monitoring
30 cfm Breather Box - (48 cfm flow capacity)
3 couplings
99.99 percent filtration efficiency @ .01 micron
External light & alarm signals
Remote alarm jack
Canadian Z180.1
BS-EN 12021:1999
OSHA 1910.134
Please specify 1/4” Hansen style or Schrader style fittings when ordering. Other fittings available for an additional charge
AIR SYSTEMS INTERNATIONAL - AIR BB30-COAAP - 30 CFM BREATHER BOX W/ AUTO-AIR FEATURE
Items #:
AIR BB30-COAAP
Pneumatic system features a reserve air trigger at 60 psig and / or loss of electrical power, it automatically switches to reserve air cylinder (or cylinders). Local & optional remote alarms will signal workers that their primary air system is in failure & has switched to a back up air supply system.
If IDLH work environments exist, the Auto-Air Breather Box option should be considered. The Auto-Air filtration system was developed to provide Grade-D breathing air with full automatic reserve air in the event of either electrical failure or reduced pressure from the main air source while working in hazardous environments. Reserve air activation occurs at 60 psi and/or loss of electrical supply, the system automatically switches to the reserve air cylinder(s). Local and optional remote alarms signal the workers that the primary air system has failed and has switched to the back-up air system
Features
30 cfm Intrinsically Safe Auto-Air TM Breather BoxTM (48 cfm flow capacity) - 2 couplings
CSA approved Class I, Div. 1, groups D and C
Filtration efficiency 99.99 percent @ 0.01 micron
Fully Automatic Reserve Air System for Work in IDLH Environments
Note: IDLH conditions require the use of a pressure demand respirator with at least a 5 minute escape cylinder
The primary air line connection is attached from the compressor to the Auto-Air Breather Box A reserve air line is attached from a single or bank of air cylinders based on the required egress duration and number of workers using the system
The system can be tested prior to each use to ensure proper function of the Auto-Air system
Always size the reserve air systems to allow an adequate safety factor for all workers to egress the environment
Please specify 1/4” Hansen style or Schrader style fittings when ordering. Other fittings available for an additional charge
AIR SYSTEMS INTERNATIONAL - AIR BB50-CO2PM - BB50-CO FILTRATION PANEL, CO2-91 MONITO
Items #:
AIR BB50-CO2PM
The system filters compressor air to provide respirator users with Grade-D quality air. The first stage element filters bulk water and particulate, the second stage coalescing filter removes atomized oils and ultra-fine particulate, and the third stage removes organic vapors and odors. Filter change indicators are standard on all three filtration stages. Filtration efficiency is 99.99% @ .01 microns. A built-in intrinsically safe carbon monoxide monitor operates on 115 VAC, or 8-16 VDC for continuous detection. A high intensity audible alarm and light signals the workers of high CO content in their breathing air. A 115 VAC electrical conduit box is provided as standard to provide AC power in and connection for AC powered remote alarms. Filtration components are mounted on powder coated steel panel.
Features
50 CFM (79 CFM flow capacity)
O2 oxygen & CO carbon monoxide monitor
99.99 percent filtration efficiency @ .01 microns
4 couplings or NPT outlet
Integrated carbon monoxide (CO) monitor uses 115 Volts AC or 8 to 16 Volts DC for continuous detection
Audible high intensity alarm & light will signal workers to high CO in breathing air supply
All portable and fixed breathing air filtration systems meet or exceed OSHA 1910.134, Canadian Z180.1 Breathing Air Standards and British Standard BS-EN 12021:1999 “RESPIRATORY PROTECTIVE DEVICES”
All filtration units are designed to flow the NIOSH maximum capacity per worker
Air Systems provides at NO CHARGE your first lab certified air quality test of your new breathing air filtration device
Please specify 1/4” Hansen style or Schrader style fittings when ordering. Other fittings available for an additional charge.
AIR SYSTEMS INTERNATIONAL - AIR BB50-CO4R - 50 CFM BREATHER BOX FILTRATION SYSTEM
Items #:
AIR BB50-CO4R
It also has standard filter change indicators for for all 3 filtration stages.
The Breather Box is a portable Grade-D filtration system designed to provide breathing air for a specific number of workers. The system filters incoming air from a compressor to provide respirator users with Grade-D quality air and monitors for CO.
The first stage element filters bulk water and particulate and has an auto drain. The second stage coalescing filter eliminates atomized oils, mists, ultra-fine particulates, and has an auto drain. The third stage filter removes organic vapors and odors and has a manual drain. Filter change indicators are standard on all three stages of filtration. Filtration efficiency is 99.99% @ .01 micron. All Breather Boxes are designed to be used in the upright and closed position to prevent internal contamination.
The standard carbon monoxide (CO) airline monitor operates on 8-16 volt DC, or 115 VAC for continuous air monitoring. An external audible alarm and light signals the workers of high CO content. Point-of-Attachment (POA) boxes can extend respirator usage beyond 300 feet.
Features
79 CFM flow capacity
4 couplings
4 independent regulators and pressure gauges
99.99 percent filtration efficiency @ .01 micron
9 Volt disposable batteries
External light & alarm signals
Remote alarm jack
Canadian Z180.1
BS-EN 12021:1999
OSHA 1910.134
Please specify 1/4” Hansen style or Schrader style fittings when ordering. Other fittings available for an additional charge
AIR SYSTEMS INTERNATIONAL - AIR BB50-HTAAP - INTRINSICALLY SAFE PNEUMATIC AUTO-AIR
Items #:
AIR BB50-HTAAP
Operates with 2400 - 5000 PSI cylinders and is suitable for hazardous locations.
Intrinsically Safe (IS) CO Monitors are CSA Approved for Class I, Division 1, Groups C and D Environments. Units are DC 9-Volt Operation Only
Features
50 cfm Intrinsically Safe Auto-Air Cart Small - (79 cfm flow capacity)
4 couplings
Please specify 1/4” Hansen style or Schrader style fittings when ordering
Other fittings available for an additional charge
Holds two 60 CF air cylinders
2 year warranty on sensor and monitor
Applications
Refineries
Chemical and Pharmaceutical manufacturing
Refueling applications
Tank cleaning
Decon required situations
Grain silo entry
All lights and remote alarms are pneumatically operated and spark free. The intrinsically safe CO monitor is CSA approved and operates on 9-volt DC batteries only.
Don't see what you need?
Click here to let us know and we'll help you find what you're looking for.The following web pages were found that match your search
AIR Systems International Innovative Safety Products MULTI-PAK Rescue Air Cart The patented MULTI-PAK series of small bottled air carts has been designed with...
More