3M

PPE Safety Solutions

Get the protection you and your workers need most with 3M PPE

3M applies science and innovation to make a real impact by igniting progress and inspiring innovation in lives and communities across the globe. Meet all your Personal Protective Equipment needs with 3M safety products including respiratory protection, fall protection, hearing conservation, and head, eye and face protection. Learn about all of the 3M safety markets and product areas and how 3M can keep everyone safer from facilities and the workplace to food safety and water quality.

Featured 3M Respiratory Products

AV-3000 Facepiece with SureSeal

Designed with customer feedback, the AV-3000 Facepiece with SureSeal combines superior fit with greater comfort and versatility. This market leading facepiece has earned it's place through enhanced features that make it extremely comfortable and easy to use. The AV-3000 SureSeal facepiece holds NIOSH approvals across a wide variety of applications, including CBRN. The facepiece versatility helps minimize equipment inventory, simplify user training, and reduce redundant fit testing to ensure lower cost of ownership than other facepieces.

Top Down Convertibility - Single Facepiece for APR, PAPR, supplied air, and SCBA applications, including CBRN
One fit test and reduced training and inventory for lower cost of ownership
Reverse Reflex faceseal for improved comfort and fit
Deep, low profile seal for easier interface with PPE
Dual large mechanical voicemitters as well as extensive electronic options for improved communications for every workplace
Available with Kevlar, Poly, or Rubber head harness

Part Numbers:
Small ................ SCO 805774-81
Medium ............ SCO 805774-82
Large ................ SCO 805774-83

3M Scott AV-3000 Facepiece with SureSeal

Series 6000 Half Facepiece Reusable Respirator

This half facepiece reusable respirator offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and a wide variety of gases and vapors according to NIOSH approvals.

The 3M™ half facepiece reusable Respirator 6000 series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time.

Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ half facepiece reusable respirator 6000 Series helps reduce exposure to many contaminants.

This series combines comfort and convenience
Comfortable soft, lightweight facepiece with easy-to-adjust head straps
NIOSH approved for negative pressure air purifying and supplied air dual airline applications
Can be disassembled, cleaned and reused
Replaceable cartridges and filters allow reuse of facepiece for cost savings
Sizes are color coded for easy identification

Part Numbers:
Small ................ 3M 6100
Medium ............ 3M 6200
Large ................ 3M 6300

3M Series 6000 Half Facepiece Respirator

Protecta Pro Full-Body Harness

View Now

Peltor Hard Hat Earmuffs

View Now

7500 Respirator Series

View Now

MARKETS

Law Enforcement

Fire, Rescue & HazMat

EMS

Industrial

Road Safety

Welding Safety

Featured 3M Fall Protection Products

DBI-SALA® ShockWave™2

Shock Absorbing Lanyard

ShockWave™2 shock absorbing lanyards incorporate a unique stretchable design. It offers complete freedom of movement while reducing trip fall hazards, dragging or snagging by expanding to 6 ft. (1.8m) when taut and automatically contracting to 4-1/2 ft. (1.4m) in reaction to the worker's movements. The design is lightweight and provides added comfort and safety. The unique inner core begins to extend and absorb energy once subjected to a fall, and limits the fall arrest forces to safe levels. A built-in impact indicator provides easy visual evidence if the shock has been involved in a fall. All DBI/SALA® lanyards incorporate our patented self-locking snap hooks which are widely recognized in the industry for their user friendly operation and are preferred by safety professionals and workers alike. Specifically designed to allow you to open and connect the hook without getting your thumb or fingers in the way - even with gloves on.

LEARN MORE

Part Numbers:
DBI-SALA® ShockWave™2 : DBI 1244306

Protecta® Rebel™ SRL 11'

Self Retracting Lifeline, 11' Web

The Protecta® SRL with web lifeline represents a major improvement in economy line self retracting lifelines (SRL). Employers can economically replace simple lanyards with the versatility and added safety of an 11 ft. (3.3m) SRL. The 11 ft. length enhances worker productivity and mobility, nearly doubling the working area of a lanyard without disconnecting. The Protecta® SRL delivers the best lifeline length to weight ratio in the industry. The rugged aluminum housing and stainless steel working components can withstand rough use, yet is extremely lightweight. Our unique thin webbing enables a compact size that is easy to use. The compact design incorporates a smooth case with rounded corners for added comfort and ease of use. An SRL's lifeline will extend as the user moves away, and retract automatically enabling the user to move about within a recommended working area at normal speeds. Should a fall occur, a speed sensing brake system will activate stopping the fall and reducing the forces imposed on the user to safe levels.

LEARN MORE

Part Numbers:
Protecta® Rebel™ SRL 11' Web : DBI 3100425

Protecta® Rebel™ SRL 20'

Self Retracting Lifeline, 20' Web

20 ft. (6.1 m) of 1" (2.5 cm) polyester web with steel snap hook, swiveling anchorage and anchorage carabiner.

Protecta® self retracting lifelines (SRL) with super tough yet lightweight composite housings are built to last providing an economical fall protection solution without compromising performance or safety. These Protecta® SRL's feature a 310 pound (141 kg) user capacity, and a robust design to ensure longevity. Protecta® is designed with the worker in mind, featuring a stackable space maximizing design, high strength web lifeline and a built in swiveling anchorage point. An SRL's lifeline will extend as the user moves away, and retract automatically enabling the user to move about within a recommended working area at normal speeds. Should a fall occur, a speed sensing brake system will activate stopping the fall and reducing the forces imposed on the user to safe levels.

LEARN MORE

Part Numbers:
Protecta® Rebel™ SRL 20' Web : DBI 3100431

Protecta® Fall Protection Compliance Kit

Complete all purpose fall protection system in one handy container

All purpose fall protection kit includes 1191995 harness, 1341001 PRO™ 6 ft. (1.8m) single-leg shock absorbing lanyard and bucket.

3M™ PROTECTA® Fall Protection Compliance Kit is often imitated, but never matched. PROTECTA® pioneered the creation of a complete fall protection system available in a convenient container. The success of the original "can" spawned the creation of several variations with different anchorage devices and a light series. The light series includes a harness and some type of shock absorbing lanyard. This approach to fall protection simplifies the buying decision and makes choosing the correct system simple, fast and safe. Our easy to use kits provide the perfect solution and are legendary for their performance, value, quality and safety.

LEARN MORE

Part Numbers:
Protecta® Compliance In A Can Light : DBI 2199802

Protecta® Fall Protection Compliance Kit

Complete roofer's fall protection system in one handy container

Roofer's fall protection kit includes 2104000 reusable roof anchor, 1191995 harness, 1340005 rope adjuster with lanyard, 1204001 50 ft. (15.2m) lifeline and bucket.

3M™ PROTECTA® Fall Protection Compliance Kit is often imitated, but never matched. PROTECTA® pioneered the creation of a complete fall protection system available in a convenient container. The success of the original "can" spawned the creation of several variations with different anchorage devices. Each kit offers a complete set up including an anchorage device, body support and connecting component for convenient compliance and safety on the job. This "ABC's" approach to fall protection simplifies the buying decision and makes choosing the correct system simple, fast and safe. Our easy to use kits and anchorage devices provide the perfect solution and are legendary for their performance, value, quality and safety.

LEARN MORE

Part Numbers:
Protecta® Compliance In A Can R Anchor : DBI 2199803

‹ ›

Request A Quote

Please fill out the form and let us know how we can assist you with more information and offer better pricing on your equipment needs.

First Name *

Last Name *

Email Address *

Work Phone *

Company *

Industry

Address *

City *

State *

Zipcode

Manufacturer - if known

Part Number - if known

Desired Quantity *

Please describe the items you are interested in *

Subscribe To Safeware: I want to receive marketing emails from Safeware, Inc.